在交换机中查看端口速率的命令是什么 华为的交换机

2024年11月16日 00:32
有3个网友回答
网友(1):

display interface GigabitEthernet1/1
GigabitEthernet1/1 current state : UP
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e214-aa69
Description: to_GGSN3-S1-P1(Gi)
The Maximum Transmit Unit is 1500
Media type is optical fiber, loopback not set
Port hardware type is 1000_BASE_SX_MMF
1000Mbps-speed mode, full-duplex mode
Link speed type is force link, link duplex type is force link
Flow-control is not supported
The Maximum Frame Length is 1536
Allow jumbo frame to pass
PVID: 30
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 30
Last 5 minutes output: 1037 packets/sec 477064 bytes/sec
Last 5 minutes input: 916 packets/sec 372706 bytes/sec
input: 2143716912 packets, 812336171573 bytes
931 broadcasts, 0 multicasts
input: 0 input errors, 0 runts, 0 giants, 0 throttles, 0 CRC
0 frame, - overruns, - aborts, - ignored, - parity errors
Output: 2360109251 packets, 1094809872937 bytes
4561 broadcasts, 42144 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
- aborts, 0 deferred, 0 collisions, 0 late collisions
- lost carrier, - no carrier

网友(2):

show controllers 端口

网友(3):

http://192.168.1.1
帐号密码都是 admin