如何在64位win7下安装PROE2001

BIN文件夹下的PROE2001.BAT，在WIN7 64位系统下会一闪而过，当使用中断命令观察窗口时，会发现CMD窗口的提示是无法识别处理器的架构，用记事本打开PROE2001.BAT，会发现以下字段

if "%PROCESSOR%" == "INTEL_64" set MC=ia64_nt
if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt
if "%PROCESSOR%" == "MIPS_R4000" set MC=r4000_nt
if "%PROCESSOR%" == "Alpha_AXP" set MC=alpha_nt
if "%PROCESSOR_ARCHITECTURE%" == "IA64" set MC=ia64_nt
if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "MIPS" set MC=r4000_nt
if "%PROCESSOR_ARCHITECTURE%" == "ALPHA" set MC=alpha_nt
if not "%winbootdir%" == "" set mc=i486_win95
if not "%MC%" == "unset" goto mc_done
echo ERROR Cannot detect what machine type you have.
echo Please make one of the following settings:
echo.
echo set PROCESSOR=Alpha_AXP - For Windows NT Alpha based machines.
echo.
echo set PROCESSOR=MIPS_R4000 - For Windows NT MIPS based machines.
echo.
echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines.
echo.
echo set PROCESSOR=INTEL_64 - For Windows Intel Itanium based machines.
echo.
echo set winbootdir= - For Windows 95/98 machines.
echo.
exit
:mc_done
其实绝大多数都是已经被淘汰的，需要进行编辑处理，将上述字段修改为如下：

if "%PROCESSOR%" == "INTEL_64" set MC=ia64_nt
if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "IA64" set MC=ia64_nt
if "%PROCESSOR_ARCHITECTURE%" == "AMD64" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt
if not "%MC%" == "unset" goto mc_done
echo ERROR Cannot detect what machine type you have.
echo Please make one of the following settings:
echo.
echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines.
echo.
echo set PROCESSOR=INTEL_64 - For Windows Intel Itanium based machines.
echo.
echo set PROCESSOR_ARCHITECTURE=AMD64 - For Windows AMD 64 based machines.
echo.
exit
:mc_done
就可以满足现在的电脑了。

修改完保存退出，再双击，使用了很多年的，拥有自己一整套开发快捷键，特殊按钮的，
老的掉牙确相当亲切的PROE2001又回来了，赶紧加载自己的启动目录吧。

屏幕闪烁的话进入proe界面/选项/查找graphics/把值改为win32_gdi/然后确定/最后从启proe。